In a perfect world the suspension of your motorcycle would react differently every time. The top half of the spring would be supple and would react flexibly to absorb small bumps and irregularities instantly. As the spring compresses, it becomes more rigid so even large bumps and holes in a road surface will not cause the suspension to bottom out.

For cost-efficiency reasons, new motorcycles are equipped with linear springs. Compressing the top half of this type of spring takes just as much force as compressing the bottom half. The result is that the top of the spring is in fact too rigid and the bottom too supple.

Fortunately, this perfect world does exist. Hyperpro produces progressive springs whereby the top half is easily compressible and compression of the bottom half is much harder. This results in a perfect set-up for every situation. A number of benefits are mentioned below:

Improved braking distance
Whenever you apply the brakes, the pressure on the front wheel increases. Regular springs cause the bike to ‘dive’ causing the brakes to become less effective. With progressive Hyperpro springs the bike takes less of a dive, the rate of resistance increases which results in an improved braking distance. Not only is this faster on the racetrack, it is also safer on the public highway!

Improved motoring performance
Small bumps and irregularities in the road surface get absorbed immediately, large bumps or holes are intercepted by the ‘more rigid’ part of the spring. This results in perfect harmony between control and comfort.

No resonance
A linear spring has a specific frequency and therefore, could resonate at that particular frequency. Resonance is not only very annoying it can also be dangerous. Progressive springs do not have a frequency so therefore never resonate; an obvious difference!

Always a perfect setup
Progressive springs always adjust themselves instantly to changing circumstances. If you carry a passenger on your motorcycle, the spring should provide more resistance and this is certainly the case with progressive springs. Hyperpro progressive springs even respond to the amount of fuel left in your tank.

We believe in our product and therefore offer a lifetime warranty against breakage. Tests have proved that even after driving a million kilometres our progressive springs maintain the same characteristics.

Soon we will be adding linear fork springs as an option for those have prefer a straight rate spring.

We have available special lowering springs for the forks and shocks. These are perfect for the rider who has a hard time reaching the ground and is looking for an economical way to lower their bike – and get the benefit of a new spring. This information will be added to the site soon.

Hyperpro progressive springs are available for almost all modern bikes as a front kit, rear kit and combi kit. A combi kit consists of progressive springs: front and back, fork oil, stickers and a practical user guide. In addition to step-by-step installation instructions, this user guide provides useful tips for optimal adjustment of your bike springs. If you prefer straight-rate (linear) fork springs, please scroll down.

Select Your Progressive Spring Application

First, find your bike on the chart below and write down your part # and price for the desired spring kit.

To order, call EPM Performance Imports at 732-786-9777

You can zoom in to read the printable pdf by clicking: Progressive Fork & Shock Spring Price List

 

Select Your Linear Fork Spring Application

First, find your bike on the chart below and write down your part # and price for the desired spring kit. These are linear (straight rate) fork springs for those who do not wish to run the progressive rate springs.

To order, call EPM Performance Imports at 732-786-9777

You can zoom in to read the printable pdf by clicking: Linear Fork Spring Price List